From material to structure, we put eco-friendliness into three things:use one layer less, choose the right one, calculate it once — without sacrificing shelf life or adding unnecessary “green”.
We make flexible packaging. For us, environmental responsibility is not a slogan but two lists:what materials we can use, and whether each layer is really needed.
“One more layer of film means more material, more weight and more transport emissions.”
Ask about the use and shelf life first, then decide the number of layers.
If no barrier is needed, no middle layer is added.
Cost, performance and transport are calculated together; shelf life is never traded away.
Printing and lamination use inks and adhesives, and evaporating solvents produce exhaust gas. We do not discharge it directly — the workshop is equipped with exhaust treatment equipment, and the gas is treated before discharge.
Equipment: UV photolysis + activated carbon; the exact process and testing follow local environmental requirements.
Degradation conditions and test reports are subject to the material supplier's documents.
Structures can also be reduced:
Clarify the barrier requirement first, then decide whether a middle layer is needed.
What Is High-Barrier PE?
High-barrier PE is not a single material, but a structure with PE as the main body and EVOH (ethylene-vinyl alcohol copolymer)added in the middle as the barrier layer. EVOH has a strong oxygen barrier and replaces the AL / NY middle layer.
The result is still a PE-based structure, which is easier to recycle in the PE stream (subject to local recycling requirements and material documents); the barrier grade and thickness are set by the contents and shelf life.
PE / EVOH / PE structure schematic
In the end, environmental responsibility is not done for show. Air, water and land are shared by everyone; how we produce and use materials today determines the environment in which the next generation grows up.
One less layer of film, a little less waste — it looks small, but multiplied by every day and every production line it is real reduction. The meaning for the future is also more than shouting “low carbon” — from design and material selection through production and transport to disposal, someone has to be responsible for every step; only by enforcing standards, treating the exhaust gas that should be treated and saving the material that can be saved can we talk about sustainability.
What we do in the factory is specific: solvent exhaust from printing and lamination is treated with UV photolysis + activated carbon before discharge; we cooperate with the environmental authorities' routine spot checks and annual testing; degradable film, high-barrier PE / all-PE and kraft paper are available as required; digital printing needs no plate making and is scheduled per order, reducing plate material and machine-washing waste.
“Environmental care is not done for show; it is left to the next generation.”
Tell us the product, its use and the target market, and our sales team will reply point by point based on the actual situation.
Chat on WhatsApp Send a Message →